Ninja Coffee Bar is an amazing coffee maker that allows you to create espresso shots as well as the creamy lattes and cappuccinos with its frothing wand.

It comes with various smart features in order to make your mornings and coffee-making routine much easier and convenient to maintain.

One of those useful features is the clean indicator light, notifying you when it’s time to finally clean your Ninja coffee bar.

However, something that most Ninja Coffee Bar owners struggle with is pesky. It would stay off for a split second. But after a few seconds, it would come back and stay on.

So, how do you solve the Ninja coffee bar clean light keeps coming on?

This article will show you how.

But first…

Read Here: Top 10 Best Ninja Coffee Bar

 

What’s The Clean Light Indicator?

Obviously, the clean light indicator is turned because it is telling you that it’s time to clean the machine.

Take a close look at the coffee machine. Can you see any buildup in your brew basket, carafe, or the water reservoir?

Look closer for a chalky white buildup, that is left by the minerals in the water you use. These accumulated minerals can actually clog the coffee maker’s connections and preventing the water from flowing properly.

Now, if the clean light indicator is on and your coffee maker looks less than sparkly, then it is time that you run the deep cleaning cycle.

So…

Read More:

Why Do You Need To Do A Deep Clean?

Other than solving the annoying problem of Ninja coffee bar clean light keeps coming on, there are other important reasons why you need to do a deep clean.

Ninja coffee bar clean light keeps coming on

Prevent Bacteria

The Ninja Coffee Bar features a filter basket. And one of the most important why you need to clean your coffee maker on a regular basis is the fact that stagnant water can be trapped in and around this filter basket.

And with most people not using their coffee maker all throughout the day, this accumulation of stagnant water has 2 4 hours to begin harboring the dangerous bacteria.

And while most people will clean the carafe lid, carafe, or even the water reservoir o a regular basis, the filter basket is most often overlooked.

Since filter baskets are usually comprised of black plastic, it can be difficult to see just how much debris and dirt have built up in and on this component. Plus, most people are not even aware that the filter basket can be removed.

So, make sure that you give the filter basket a thorough cleaning in order to prevent the stagnant stores of water as well as used coffee grounds in order to stop bacteria build-up and growth.

 

Produces Great-Tasting Coffee

Not cleaning your coffee maker on a regular basis will also cause some flavor changes in your cup of coffee.

A dirty coffee maker will invariably have oils and ground residues from old beans which can affect how the newly brewed coffee tastes.

However, once you get into the habit of cleaning your Ninja Coffee Bar and all its components on a regular basis, then you will find it much easier to brew the perfect cup of coffee every time.

 

Reducing Mineral Deposits

Another great reason why you need to deep clean your coffee maker is to ensure that there’s no mineral build-up inside, which in turn, extends the lifetime of the machine as well as shortening the overall brewing times.

Hard water mineral deposits can accumulate throughout the system which can affect the performance of your coffee maker as well as the flavors of the coffee that it brews. With more buildup, the coffee maker will have a hard time brewing, causing brewing to slow down. In addition, the coffee maker will have to double its efforts in order to brew a cup of coffee which puts a strain on the machine.

So, if you want to keep your coffee maker at tip-top condition, you will need to do regular deep cleaning in order to reduce mineral deposits which can cause clogs as well as the problem of Ninja coffee bar clean light keeps coming on.

 

How To Fix Ninja Coffee Bar Clean Light Keeps Coming On

Ninja coffee bar clean light keeps coming on

 

1) Descaling The Ninja Coffee Bar

To solve the Ninja coffee bar clean light keeps coming off the problem, you will need to descale your coffee maker. For this, you can either use vinegar or a commercial descaling solution.

The descaler solutions are specifically made for cleaning kettles and coffee makers. However, it is possible to make your descaling solution using white vinegar.

Now, onto the descaling process, this will depend on the Ninja Coffee Bar model that you have as well as its date code. You will be able to find this on the plug at the cord’s end.

Read More: 

 

For The Classic Ninja Coffee Bar with date codes 0016-3206, 0016-2516, or ends in 15, follow these steps:

  • Empty the coffee maker by removing any coffee granules or water from the basket and water reservoir. Also, empty the carafe under the wire mesh basket brew.
  • Pour the descaler of your choice and water, according to instructions up to the maximum line. Or pour a white vinegar, filling until the 16oz travel mug line and water mixture up to the maximum fill line.
  • Press the “Clean” button. The machine will start the cleaning cycle, distributing the descaling solution throughout the machine. This usually takes a few minutes to complete.
  • Once the cleaning cycle is done, empty the water reservoir and the jug.
  • Refill with fresh water then press the “Clean” button again and wait for a couple of minutes. This rinses the machine of any descaling solution residues.
  • Repeat the rinsing process in order to make sure that you have completely rinsed the machine of all descaling solution residue.
  • Once the clean cycle is complete, make sure to thoroughly wash the jug, reservoir, and wire mesh basket with hot soapy water.
  • Lastly, wipe the machine with a damp cloth, drying the parts with a towel, and reassembling the machine.

 

For The Classic Ninja Coffee Bar with date codes 3316-5216 or 2616-5216, follow these steps:

  • Press the “Clean” button. The machine will start the cleaning cycle, distributing the descaling solution throughout the machine. This usually takes an hour to complete. Avoid pressing other methods or removing the jug during the cleaning cycle.
  • Once the cleaning cycle is complete, it’ll make a beeping sound with the word “Flush” popping up on the display screen.
  • Empty the basket, carafe, and water reservoir, cleaning them thoroughly under running water.
  • Refill the reservoir with more clean water until the maximum fill line.
  • Press the “Clean” button again to run the next step of the cleaning cycle. It is crucial that you start rinsing within the 15 minutes of hearing the beep. The rinse cycle usually takes at least 8 minutes to complete.
  • Once the clean cycle is complete, make sure to thoroughly wash the jug, reservoir, and wire mesh basket with hot soapy water.
  • Lastly, wipe the machine with a damp cloth, drying the parts with a towel, and reassembling the machine.
  • Empty the coffee maker by removing any coffee granules or water from the basket and water reservoir. Also, empty the carafe under the wire mesh basket brew.
  • Pour the descaler of your choice and water, according to instructions up to the maximum line. Or pour a white vinegar, filling until the 16oz travel mug line and water mixture up to the maximum fill line.

 

For The Classic Ninja Coffee Bar with date codes that ends in 17, follow these steps:

  • Empty the coffee maker by removing any coffee granules or water from the basket and water reservoir. Also, empty the carafe under the wire mesh basket brew.
  • Pour the descaler of your choice and water, according to instructions up to the maximum line. Or pour a white vinegar, filling until the 16oz travel mug line and water mixture up to the maximum fill line.
  • Press the “Clean” button. The machine will start the cleaning cycle, distributing the descaling solution throughout the machine. This usually takes an hour to complete. Avoid pressing other methods or removing the jug during the cleaning cycle.
  • Once the cleaning cycle is complete, it’ll make a beeping sound and the “clean” light indicator will go off.
  • Empty the basket, carafe, and water reservoir, cleaning them thoroughly under running water.
  • Refill the reservoir with clean water until the maximum fill line and put the carafe back to the coffee basket.
  • Set the coffee maker to a full carafe and press the “Classic Brew cycle”, to start the rinsing cycle.
  • Once finished, do another rinsing process to ensure that there’s no descaling solution residue left.
  • Once the clean cycle is complete, make sure to thoroughly wash the jug, reservoir, and wire mesh basket with hot soapy water.
  • Lastly, wipe the machine with a damp cloth, drying the parts with a towel, and reassembling the machine.

 

 

2) Unplug The Coffee Maker

After you descaled your Ninja coffee bar, reset the machine. In order to do this, you only need to unplug the machine from the socket and wait for at least 5 minutes.

After that, plug it in and reset the clock. The cleaning indicator should now be off. Also, keep in mind that unplugging the Ninja Coffee Bar will also reset your brew timer, so you will need to set it up again.

 

Ninja coffee bar clean light keeps coming on

3) Maintenance Routine

So, now that you have already deep-cleaned your coffee maker, here are some maintenance tips that you need to do in order to prevent the problem of Ninja coffee bar clean light keeps coming on again.

  • Clean On A Weekly Basis

If you are a heavy coffee drinker, then it is probably a better idea to develop a cleaning routine on a weekly basis. This should help keep your coffee maker working in top condition while also preventing the Ninja coffee bar clean light keeps coming on the problem.

Every week, take all the detachable parts and wash them thoroughly with hot soapy water or throw them in the dishwasher. This can help in removing any residual calcium which has been built over the week.

  • Don’t Forget The Frothing Wand

Ninja Coffee Bars sometimes feature a milk frothing wand that allows you to create the creamy coffee drinks such as cappuccino and latte. Now, since you are already cleaning the machine, then do not forget about the milk frothing wand.

The frothing wand needs to be quickly washed and rinsed ever after use. You can do this by filling a cup halfway with warm water and holding the wand below the surface, turning it for at least 20 – 30 seconds.

To do a deep clean, you only need to unlock the whisk and slide it off. Wash the wand with soapy water or throw it in the dishwashing machine.

  • Use Demineralized Water

The water you use for coffee brewing contains minerals such as calcium and magnesium. Over time, these minerals accumulate and coat the insides of your coffee maker, which eventually clogs up your tubes and filters.

In order to minimize mineral build-up, consider using demineralized water. Or you can also filter your water.

  • Clean Removable Parts Every After Use

The water reservoir, carafe, and filter will need to be cleaned immediately after every use. Also, do not leave used, wet coffee ground in the coffee maker for an extended period, otherwise yeast, mold, and bacteria will start to grow inside.

Read More: 

Final Thoughts

So, there you have it. We hope that this step-by-step guide helped you fix the Ninja coffee bar clean light keeps coming problem. Get your coffee bar back in tip-top condition and start brewing your favorite coffee with the annoying clean light indicator.

Have you tried our tips? Share your experience with the community by firing up the comment section below. Please don’t forget to share this article with your family and friends.

Until then, happy brewing!

RELATED ARTICLESMORE FROM AUTHOR